The complete cover — corner blocks and roof slats visible
The common case: a house-sized unit on wall brackets. This size takes both an air conditioner and a smaller heat pump without going bespoke.
Pure white RAL 9010 makes sense wherever the wall is light and the joinery white — which covers most houses rendered in white, cream or light grey. A dark cover would put a black patch on the facade at exactly eye level. A white one dissolves into the background and you see the form rather than the contrast. It is also the only sensible choice on a balcony or loggia, where the unit stands in shade and every dark element deepens it.
- External dimensions
- 1100 × 850 × 450 mm
- Fits a unit up to
- Units up to 95 × 70 × 33 cm — 5–7 kW splits
A 110 × 85 × 45 cm air-conditioner cover
The most frequently chosen size: for a house-sized unit on wall brackets or on feet at the façade. It takes both a 5–7 kW air conditioner and a smaller heat pump, so if you are between sizes this is the safer choice — a few spare centimetres do no harm, while missing them means a bespoke order.
What exactly you get
The price covers every part needed to build the whole cover, with no trip to a hardware shop: T-SLOT 20 × 20 frame profiles cut to size, eight three-way corner blocks together with a pack of M6 × 16 mm button-head socket screws to bolt them, 20 × 120 mm infill bars cut for this particular box, infill mounting sets — each already containing M5 × 8 mm low-profile screws and drop-in T-nuts — and a set of external plastic corner caps that close the edges. The itemised list with quantities and unit prices is printed alongside, above the enquiry button.
Why a 20 × 120 mm bar
All three ready boxes are costed on 20 × 120 mm bars, because that is the section our prototype uses and the spacing we tested on it. A wide bar gives a clear horizontal line, needs the fewest parts to bolt up and, with a 20 mm gap, leaves enough opening for the unit to breathe. If you prefer a tighter pattern or a wider bar, every section from 20 × 20 to 20 × 200 mm is in the Box parts section and the configurator will build a cover from them.
Colour and finish
The frame is anodised — silver or black — and the infill bars are powder coated to order, so the RAL colour costs nothing. We suggest RAL 7016 anthracite by default, because it matches the joinery and gutters of most new houses. The plastics we print in house from UV and frost resistant PET-G, in a colour matched to the bars or deliberately contrasting.
Assembly and delivery
The box ships flat, in one carton. Tools needed: a 4 mm hex key for the corner blocks, a 3 mm one for the M5 screws in the frame slot, and a cordless driver with a hex socket — that last one drives the self-drilling screws that join the printed mounts to the infill bars. Nothing to cut or weld, because every length is cut to size and the screws drill their own holes. The structure comes apart, so for a service call you lift off a wall of bars and put it back afterwards.
Box M — 110 × 85 × 45 cm, pure white RAL 9010
The size that fits most installations.
The classic white of render and white joinery. On a light facade you see the form itself, not a dark rectangle against the building.
The photos and price refer to this finish.
Code: LMV-M-9010
What's in the set
- Upright 20×20 · 850 mm4 pcs × 23,06 zł
- Width member 20×20 · 1060 mm4 pcs × 28,76 zł
- Depth member 20×20 · 410 mm4 pcs × 11,12 zł
- Three-way corner block8 pcs × 10,50 zł
- Infill bar — front · 1060 mm5 pcs × 67,66 zł
- Infill bar — sides · 410 mm10 pcs × 26,17 zł
- Infill bar mounting set15 pcs × 9,99 zł
- External corner set1 pcs × 49,99 zł
- M6 × 16 button-head screws (25 pcs)1 pcs × 11,45 zł
Set price
1 147,05 zł
The price covers every part on the list. We quote delivery when we reply.
This size in another finish: Anthracite RAL 7016