Gallery
Examples of covers in different materials, colours and degrees of enclosure.
The images below are visualisations showing what is possible. We will replace them with photographs from real installations as soon as the first orders are fitted.
VisualisationAnthracite cover against a wall with ornamental grasses
An aluminium cover in horizontal anthracite slats, fully enclosed with sides and top. It stands on its own feet on the gravel margin, right up against the wall — the free-standing version, with nothing anchored into the masonry.
- Material
- Aluminium
- Colour
- RAL 7016 anthracite
- Profile
- 20×80 slat, horizontal
VisualisationWood-effect slats in an anthracite frame
Two finishes played against each other: an anthracite frame with wood-effect slats. One for elevations with timber detailing or a deck — the cover stops being a piece of equipment and starts complementing the joinery.
- Material
- Aluminium
- Colour
- RAL 7016 frame, wood-effect slats
- Profile
- 20×100 slat, horizontal
VisualisationWhite cover on a pale elevation
A cover in RAL 9003 white against white render — it disappears into the wall, leaving only the gentle rhythm of the slats. A good choice when the unit hangs somewhere obvious, near the front door.
- Material
- Aluminium
- Colour
- RAL 9003 white
- Profile
- 20×60 slat, horizontal
VisualisationCorner cover beneath a window
A unit mounted in a corner, under the sill. The front and one side are enclosed — the other side sits against the wall and needs no infill. The anthracite picks up the window frames.
- Material
- Aluminium
- Colour
- RAL 7016 anthracite
- Profile
- 20×80 slat, horizontal
VisualisationWood effect against a white house
Wood-effect slats against a white elevation with timber detailing. The cover echoes the soffit boards and the decking instead of competing with them.
- Material
- Aluminium
- Colour
- RAL 7016 frame, wood-effect slats
- Profile
- 20×100 slat, horizontal
VisualisationVertical slats beside a garage
The same profile, a different direction: vertical slats make the cover look taller and pick up the vertical ribbing of the garage door. Wall mounted, with the back left open.
- Material
- Aluminium
- Colour
- RAL 7016 anthracite
- Profile
- 20×60 slat, vertical