Screws
M5 button head socket screws
M5 button-head socket screws, 25 to a pack — for the joints in a cover where the screw stays in sight. The rounded head looks softer than a flat one, has no sharp edge and does not collect water or dust in the socket the way a countersunk head does. They fit the 6 mm slot of the 20 × 20 series with an M5 T-nut or a drop-in nut. A 3 mm hex socket. If you are after the screw for a corner block, this is not it: a 20 × 20 block takes the heavier M6 × 16 mm, which we list next to this one in the same lengths.
Before you order
- For the 6 mm slot in the 20 × 20 series, wherever the head stays visible.
- For corner blocks use the M6 × 16 mm version — M5 is too fine a thread for the block.
- Takes a 3 mm hex key.
9,35 zł
- Code:
- M56MM-K, M58MM-K, M510MM-K, M512MM-K, M516MM-K, M520MM-K, M525MM-K, M530MM-K, M535MM-K, M545MM-K, M550MM-K