Corner blocks
Three-way corner block 20 × 20
A three-way corner block for 20 × 20 series aluminium profiles — it ties three profiles into one right-angle corner. This is what the four bottom and four top corners of the box stand on. Assembly: one M6 × 16 mm button-head socket screw per arm — straight into a threaded profile end, or through an M6 T-nut into the side of a profile. A 4 mm hex key, no drilling and no welding. Mind the series: a 20 × 20 block does not fit 30 × 30 profiles and vice versa. The joint comes apart, so you can lift the cover off for a service call and put it back.
Before you order
- Fits 20 × 20 series profiles only (T-SLOT and V-SLOT) with a 6 mm slot.
- Add M6 × 16 mm button-head socket screws — one per arm of the block.
- Into a threaded profile end it goes straight in; into the side of a profile it needs an M6 T-nut.
10,50 zł
- Code:
- HW1113BC